Agilent Technologies XGS-600, Инструкция по эксплуатации, Страница: 64 / 90

XGS-600 Gauge Controller
64
DRAFT 4/
15/14
common pin. SenTorr used terminal block connectors while MultiGauge used a
25-position Dsub. XGS-600 does not provide terminal blocks.
❑
The standard relay outputs are housed in a 25-position Dsub connector using the
same pinout as MultiGauge, provide NO and NC contacts, where only two setpoints
per channel can be assigned. These contacts are not rated for switching AC mains
voltages.
❑
XGS-600 is not available in a Black Box version with a remote mountable display.
Table A-13 list the features compatible for the MultiGauge and SenTorr units.
Table A-13 Feature Compatibility Table
Feature XGS-600 MultiGauge SenTorr BA or UHV SenTorr CC
Hot Filament
Gauges All All All n/a
Cold Cathode
Gauges IMG100
IMG300
(UHV-IMG) IMG100
UHV-IMG
525CCG n/a 525CCG
Convection Gauges 2 ch Convection
Bd using (2)
Dsub9
4 ch TC Bd using
DsuB37
2 ch ConvecTorr
Bd using (2) Dsub9
2 ch ConvecTorr
using (2) Dsub9
2 ch TC
2 ch ConvecTorr
using (2) Dsub9
2 ch TC
CDG’s Analog Input
Board (2) Dual Ch CDG
Bds n/a n/a
Rem I/O Uses Fire-wire
conn on each
board
Emission/degas
control inputs
can be user
selected to be
active LO
(default) or
active HI. CNV
CAL inputs are
active LO. Logic
levels are std
TTL logic, +5V
max input.
Needs optional
Remote I/O Bd
using Dsub37
Uses opto-isolated
active HI inputs
32V max
Micro phone jack
for IG control
Uses opto-isolated
active HI inputs
32V max
Micro phone jack
for IG control
Uses opto-isolated
active HI inputs
32V max