Scope Features and Functions
2
U2701A/U2702A USB Modular Oscilloscopes User’s Guide
31
Invert Control
The invert control inverts the displayed waveform with respect
to the ground level. When the oscilloscope is triggered on the
inverted waveform, the trigger is also inverted as well.
Click on the Stop button to stop the signal acquisition. To invert
the waveform on channel 1, click on the
button on the soft
front panel. Click on the
channel options button and
select
Invert
from the options list.
show the changes before and after
conversion.
Figure 2-2
The waveform before inversion
U2700A_Modular_Scope.book Page 31 Tuesday, May 6, 2008 9:32 AM
