2
Scope Features and Functions
32
U2701A/U2702A Modular Oscilloscopes User’s Guide
Figure 2-3
The waveform after inversion
Bandwidth Limit Control
The bandwidth limit control can be used to removed high
frequency components on a waveform that are not important to
the analysis of the waveform.
To remove high frequency components from the waveform on
channel 1, click on the
button on the soft front panel. Click
on the
Channel Options
button and select
BW Limit
from
the options list. The LowPass cutoff is at 25 MHz.
N O T E
When the BW limit control is not selected, the oscilloscope is set to full
bandwidth.
U2700A_Modular_Scope.book Page 32 Tuesday, May 6, 2008 9:32 AM
