Tilt Stand
Tilt stand at 60°
Tilt stand at 30°
The Agilent U1241A and U1242A are safety-certified in compliance
with the following safety and EMC requirements:
• IEC 61010-1:2001 / EN61010-1:2001
• USA: UL 61010-1:2004
• Canada: CSA C22.2 No. 61010-1:2004
• Category III 1000 V Overvoltage Protection
• IEC 61326:2002/EN 61326: 2003
• CISPR 11:1990/EN55011:1990
• Canada: ICES-001:2004
• Australia/New Zealand: AS/NZS CISPR11:2004
Safety Notices
C A U T I O N
A
CAUTION
notice denotes a hazard. It calls attention to
an operating procedure, practice, or the like that, if not
correctly performed or adhered to, could result in damage
to the product or loss of important data. Do not proceed
beyond a
CAUTION
notice until the indicated conditions
are fully understood and met.
WA RN I N G
WARNING notice denotes a hazard. It calls attention to
an operating procedure, practice, or the like that, if not
correctly performed or adhered to, could result in per-
sonal injury or death. Do not proceed beyond a WARN-
ING notice until the indicated conditions are fully
understood and met.
Safety Symbols
CAT III
1000 V
Safety Information
Caution, risk of danger (refer to this manual
for specific Warning or Caution information)
Caution, risk of electric shock
Earth (ground) terminal
Category III 1000 V Overvoltage Protection
For further safety information details, refer to the Agilent U1241A and U1242A Handheld Digital Multimeter
User’s and Service Guide.
First Edition, July 20, 2007
©
Agilent Technologies, Inc. 2007
Printed in Malaysia
Agilent Technologies
U1241-90024
U1241A_U1242A_QSG_ENG_MY.fm Page 4 Tuesday, July 3, 2007 2:23 PM
