Agilent Technologies TwisTorr 305-IC SF, Руководство пользователя

Страница: 258 / 279

Technical Information
258 Agilent TwisTorr 305-ICQ & 305-IC SF User Manual
Table 7 Window meanings
Win # Read Write Type Name Meaning Default
(Factory
Set)
125 Always Always A
Set the vent valve
operation
Set the vent valve operation
0 = Automatic
1 = On command Automatic
126 Always Always N
Vent valve opening
delay
Vent valve opening delay (expressed in 0.2sec)
3 sec
143 Always Always N External Fan Config
external fan configuration:
0 = Always On
1 = Serial (generic output serially controlled)
Always
On
144 Always Always L
External Fan
Setting
External fan setting
Off
147 Always Always N
Vent valve opening
time
Vent valve opening time (expressed in 0.2sec; 0=infinite)
0
157 Always Always N Gas Load Type 0 = molar mass ≥ 30 g/mol (e.g., Ar)
1 = 4 g/mol < molar mass < 30 g/mol (e.g., N2)
2 = molar mass ≤ 4 g/mol (e.g., H2, He)
Ar
167 Always Stop L Stop speed reading It reads the pump speed while in stop mode
On
200 Always - N Bus current It reads the actual value of the bus current supplied by controller
to electric motor
---
201 Always - N
3phase voltage
It reads the actual value of the 3phase voltage supplied by
controller to electric motor
---
202 Always - N Output power It reads the actual value of power supplied by controller to
electric motor
---
203 Always - N Driving frequency This is the actual exciting frequency
204 Always - N Body temperature It reads the Body temperature
---
205 Always - N Pump status
Real time pump status:
0 = Stop
1 = Interlock
2 = Ramp
3 = Autotuning
4 = Braking
5 = Normal
6 = Fail
---
206 Always - N Error code
This location has a bit significant:
11 = Run Up Time
10 = Body HW Over Temp
9 = RFU/Not used
8 = Rotor Locked
7 = Too Hight Load
6 = Fault DRV8305
5 = Vdc (supply) Over Voltage
4 = Thermalpad Overtemp
3 = Vdc (supply) Under Voltage
2 = Controller Over Temp
1 = Pump Over Temp
0 = No connection to pump
---
211 Always - N
controller
temperature
It reads the MOSFET bridge temperature
---