Agilent Technologies TV 301-P, Руководство пользователя

Страница: 180 / 224

17
Technical Information
Interconnections
180/224 TV 301-P Navigator Controller User Manual / 87-901-001-01 (B)
It is a 15-pins D type connector; the available signals are detailed in
the table, the following paragraphs describe the signal characteristics
and use.
Table 2 Signal characteristics and use
Pin N. Signal name In/Output
1 Start/Stop (+) In
2 Start/Stop (-) In
3 Interlock (+) In
4 Interlock (-) In
5 Speed setting (+) In
6 Speed setting (-) In
7 Soft Start (+) In
8 Soft Start (-) In
9 + 24 Vdc Out
10 Spare
11 Programmable set point Out
12 Spare
13 Fault Output Out
14 Programmable analog signal (+) Out
15
•
Ground
•
Programmable analog signal (-)
Out
Signal description
START/STOP : input signal to start or stop the pump. With the
supplied cover connector the START/STOP (+) signal is connected to
the +24 Vdc pin and the START/STOP (-) signal to the GROUND pin:
in this condition the pump automatically starts as soon as the
controller recognises the input supply ("Plug & Pump").
INTERLOC K: input signal to control the pump rotation. With the
supplied cover connector the INTERLOCK (+) signal is connected to
the +24 Vdc pin and the INTERLOCK (-)signal to the GROUND pin.