Agilent Technologies Turbo -V 1001, Руководство пользователя

Страница: 47 / 120

Technical Information
Connection J1 Remote I/O Interconnections
17
Turbo-V 1001 Rack Controller User Manual / 87-901-033-01 215/288
Connection J1 Remote I/O Interconnections
Figure 7 Remote I/ O connector
All the input/output remote signals to/from the controller must be
connected at P1 mating connector. With the provided J1 mating
connector (shipped with pin 3 shorted with pin 9 and pin 4 shorted
with pin 15) make the connection with AWG 24 (0.25 mm
2
) or smaller
wire to the pins indicated in the figure to obtain the desired
capability. It is a 15-pins D type connector; the available signals are
detailed in the table, the following paragraphs describe the signal
characteristics and use.
Tab. 3
PIN N. SIGNAL INPUT/OUTPUT
1 START/STOP (+) IN
2 START/STOP (-) IN
3 INTERLOCK (+) IN
4 INTERLOCK (-) IN
5 SPEED SETTING (+) IN
6 SPEED SETTING (-) IN
7 SOFT START (+) IN
8 SOFT START (-) IN
9 +24Vdc OUT
10 SET POINT (RELAY) OUT