Agilent Technologies TPS-compact X3580-64000, Руководство пользователя

Страница: 298 / 312

17 Technical Information
Window Protocol
298/312 TPS-compact User Manual / 87-901-010-01 (F )
N. Read/
Write
Data
Type
Description Admitted Values
402 R A CRC Param. (PA) PA8XXXX (where “XXXX”
are variable)
404 R A CRC Parameter structure "XXXX"
406 R A Program Listing Code "XXXXXXXXXX"
407 R A Parameter Listing Code "XXXXXXXXXX"
500 Reserved to Agilent service
503 R/W N RS 485 address 0 to 31 (default = 0)
504 R/W L Serial type select 0 = RS 232
1 = RS 485 (default = 0)
NOTE
1.
Automatic means that when the controller stops, the vent valve is
opened with a delay defined by window n. 126; when the
controller starts, the vent valve is immediately closed.
2.
On command means that the vent valve is opened or closed by
means of window n. 122.
3.
These commands remove the pump motor supply for a short time.
If they are used continuously, they can cause the pump stopping.
7 6 5 4 3 2 1 0
TOO HIGH LOAD NO CONNECTION
SHORT CIRCUIT PUMP OVERTEMP.
OVERVOLTAGE CONTROLL. OVERTEMP.
Figure 38 Windows N. 206 Bit Description