Agilent Technologies PlateLoc, Руководство пользователя

Страница: 82 / 144

Chapter 4: Sealing plates
PlateLoc User Guide
68
Setting the sealing parameters
About this topic
This topic explains how to set the sealing parameters when using the
PlateLoc as a standalone device or in a Velocity11 lab automation
system.
Before you start
Make sure:
❑
The PlateLoc is turned on.
❑
The air is turned on.
❑
The seal is properly loaded.
❑
Lab automation systems only. Communication between the
controlling computer and the PlateLoc is established.
Standalone device
procedure To set the sealing parameters for the standalone device:
1. From the touch screen Main Menu , press Setup.
2. In the Set Parameters Menu that appears, set the following:
‹ Seal Time (in seconds). Seal Time is the amount of time the hot
plate is in contact with the seal material and the plate.
‹
Seal Temp (in degrees Celsius). Seal Temp is the temperature of
the hot plate when the seal cycle starts.
00206
PlateLoc
screen menu 1
Main Menu
Seal Time: 1.8s
S e t T i m e : 1 . 8 S e c o n d s
S e t Te m p : 2 0 D e g r e e s C
A i r p r e s s u r e : 8 9 p s i
Seal Temp: 20°C
Status: Ready
Setup
R
U
N
Press Setup.
Press arrows to
set temperature.
00207
PlateLoc
screen menu 2 00207
PlateLoc
screen menu 2
Set Parameters Menu
Set Seal Time: 1.8s
V e r s i o n 3 . 7 . 2 C y c l e c o u n t : 6 3 7 7 9
Set Seal Temp: 160°C
Service Done
Press arrows to set
seal application duration.