Agilent Technologies PCG-750, Руководство по установке

Страница: 8 / 18

PGC 750 Speed Control Kit
2
D
R
A
F
T
Setting the Setpoints
The two set points are push button adjusted as shown in Figure 1-2.
Figure 1-2 Setpoint Screwdriver Adjustments
When a set point is activated, the corresponding open collector, on pin 1 for set point 2 and
on pin 2 for set point 1, becomes active and can sink current to the common ground. This
connection may be used to drive a relay coil or other indicator that shows the trigger set
point has been reached.
Setpoint 1 Setpoint 2