Agilent Technologies N5241A, Руководство по обслуживанию

Страница: 327 / 354

Service Guide N5242-90001 8-15
PNA Series Microwave Network Analyzers General Purpose Maintenance Procedures
N5241A/42A Option Enable Utility
Repairing and Recovering Option Data
License, option, and model number data are stored in an EEPROM on the frequency
reference board and written into the gen.lic file on the hard disk drive. If the data stored in
either of these items is lost, it can be recovered from the other item.
If the data on both the hard disk drive and the frequency reference board is lost, it can not
be recovered. Contact Agilent for assistance. Refer to
“Contacting Agilent” on page 2-15 .
Recovery of Data After Repair
• If the frequency reference board is replaced, use the
Repair
selection to recover data that
has been lost as a result of the repair:
1. Select
Repair
from the
Option Enable
menu bar (see Figure 8-6 on page 8-13 ).
2. Click the
Freq Ref board has been replaced
check box.
3. Click
Begin Repair
. The data is written from the gen.lic file into the EEPROM.
• If the hard disk drive is replaced, a new gen.lic file is automatically created when the
Network Analyzer
application starts, by retrieving the data from the EEPROM.
Recovery of Data if Option or Model Numbers are Incorrect
If the analyzer option or model numbers are not listed correctly on the analyzer display, in
either the Option Enable Dialog Box or the About Network Analyzer display, you should
regenerate the options license file, gen.lic:
1. Exit the
Network Analyzer
application.
2. Remove (or rename) the existing gen.lic file:
a. Open
Windows Explorer
and navigate to
C:\Program Files\Agilent\Network
Analyzer
.
b. Delete (or rename) gen.lic.
3. Exit the
Windows Explorer
application.
4. Open the
Network Analyzer
application. The application will generate a new gen.lic file
when it starts.
5. Check the option listing:
a. Press UTILITY , then , then or
b. Press UTILITY , then , then .
6. If the options are still not listed correctly, contact Agilent for assistance. Refer to
“Contacting Agilent” on page 2-15 .
System
Service Option Enable
System
Help About NA ...