Agilent Technologies M9405A, Руководство пользователя и сервисное руководство

Страница: 5 / 26

iii
Safety Notices
The following safety notes are used throughout this document. Familiarize yourself with each of these
notes and its meaning before performing any of the procedures in this document.
WARNING Warning denotes a hazard. It calls attention to a procedure which, if not correctly
performed or adhered to, could result in injury or loss of life. Do not proceed beyond a
warning note until the indicated conditions are fully understood and met.
CAUTION Caution denotes a hazard. It calls attention to a procedure that, if not correctly performed
or adhered to, could result in damage to or destruction of the product. Do not proceed
beyond a caution sign until the indicated conditions are fully understood and met.
General Safety Information
Introduction
This product is intended for use by qualified personnel that are familiar with the safety precautions
required to avoid any possible injury. Read and follow all installation, operation, and maintenance
information carefully before using this product. Refer to the user documentation for complete product
specifications
This product has been designed and tested in accordance with accepted industry standards, and has been
supplied in a safe condition. The documentation contains information and warnings that must be followed
by the user to ensure safe operation and to maintain the product in a safe condition.
Cleaning Precautions
To clean the connectors use alcohol in a well ventilated area. Allow all residual alcohol moisture to
evaporate, and fumes to dissipate prior to energizing the instrument.
WARNING
To prevent electrical shock, remove the
Agilent Technologies M9405A
from the chassis before
cleaning. Use a dry cloth or one slightly dampened with water to clean the external case parts. Do
not attempt to clean internally. To clean the connectors, use alcohol in a well-ventilated area.
Allow all residual alcohol moisture to evaporate, and the fumes to dissipate prior to energizing the
instrument.