Notices
© Agilent Technologies, Inc. 2013
-2014
No part of this manual may be reproduced
in any form or by any means (including
electronic storage and retrieval or
translation into a foreign language)
without prior agreement and written
consent from Agilent Technologies, Inc.
as governed by United States and
international copyright laws.
Manual Part Number
M9000-90001
Edition
Nov
17
, build
11
.
17
.14:47
Printed in
U
SA
Warranty
The material contained in this document is
provided "as is," and is subject to being
changed, without notice, in future editions.
Further, to the maximum extent permitted by
applicable law, Agilent disclaims all
warranties, either express or implied, with
regard to this manual and any information
contained herein, including but not limited
to the implied warranties of merchantability
and fitness for a particular purpose. Agilent
shall not be liable for errors or for incidental
or consequential damages in connection with
the furnishing, use, or performance of this
document or of any information contained
herein. Should Agilent and the user have a
separate written agreement with warranty
terms covering the material in this document
that conflict with these terms, the warranty
terms in the separate agreement shall
control.
Technology Licenses
The hardware and/or software
described in this document are
furnished under a license and may be
used or copied only
in accordance with
the terms of such license.
Restricted Rights
Legend
If software is for use in the performance
of a U.S. Government prime contract or
subcontract, Software is delivered and
licensed as "Commercial computer
Software" as defined in DFAR 252.227-
7014 (June 1995), or as a "commercial
item" as defined in FAR 2.101(a) or as
"Restricted computer software" as
defined in FAR 52.227-19 (June 1987) or
any equivalent agency regulation or
contract clause. Use, duplication or
disclosure of Software is subject to
Agilent Technologies’ standard
commercial license terms, and non-
DOD Departments and Agencies of the
U.S. Government will receive no greater
than Restricted Rights as defined in
FAR 52.227-19(c)(1-2) (June 1987). U.S.
Government users will receive no
greater than Limited Rights as defined
in FAR 52.227-14 (June 1987) or DFAR
252.227-7015 (b)(2) (November 1995), as
applicable in any technical data.
Safety Notices
A
CAUTION
notice denotes a hazard. It
calls attention to an operating procedure,
practice, or the
like that, if not correctly
performed or adhered to, could result in
damage to the product or
loss of
important data.
Do not
proceed beyond a
CAUTION
notice until the indicated
conditions are fully understood and
met.
A WARNING notice denotes a hazard. It
calls attention to an operating procedure,
practice, or the like that, if not correctly
performed or adhered to, could result in
personal injury or death. Do not proceed
beyond a WARNING notice until the
indicated conditions are fully understood
and met.
Содержание M90XA
