14
Agilent X/P/K281C Adapters Operating and Service Manual
2
Installation
Performance Test – SWR
The maximum SWR for the adapters are shown in
Table 3- 1
and
Figure 3- 1
. When making these measurements, the test
results must be less that those listed in
Table 3- 1
plus the
measurement uncertainty of the measuring system.
Measurements may be made using a standard reflectometer
setup. To ensure satisfactory performance, make sure flanges
and coaxial connectors are not damaged or worn.
Adjustments
Adjustments should not be made unless the adapter does not
meet specifications, or unless the unit has been physically
damaged.
