Agilent Technologies Infiniium Скачать руководство пользователя | Manualshive

Страница: 71 / 130

background image

Using the Oscilloscope

Graphical User Interface

3-25

particular measurement situation. For example, it might be easiest to set a
coarse vertical scale using the knobs, then fine-tune the setting using the
graphical user interface.

The graphical interface is arranged so that the most common functions affecting
the waveform display are located around the edge of the waveform viewing area.
These include the measurement toolbar, horizontal and trigger toolbar, and
vertical toolbar.

Measurement Toolbar

The measurement toolbar contains icons representing the most commonly used
automatic measurements built into the oscilloscope.

Drag and Drop Measurements

By dragging one of the measurement

icons to a waveform in the waveform display area, you can make that
measurement on the waveform. As you drag a measurement icon around
the screen, the icon outline changes color to match the color of the closest
waveform. This makes it easy to see which waveform will be measured
when you drop the icon. For those measurements that are done on
waveform features, the measurement is made at the feature closest to the
location where you dropped the icon. For example, you might want to
measure the rise time of the fifth rising edge; dropping the rise time
measurement icon at that edge will cause the measurement to be made on
that edge.

You can also make a measurement by simply clicking the icon on the
measurement toolbar, then selecting the source to be measured in the dialog
box that appears. When you start a measurement this way, any measurements
on waveform-specific features will measure the feature closest to the horizontal
reference indicator.

Each waveform can have multiple simultaneous measurements and the
measurements can all be of the same type, if desired. For example, you can
have 3 pulse width measurements on different parts of the same waveform.

Geometric Measurement Indicators

For each measurement currently

running, a geometric indicator at the measurement location on the
waveform corresponds to an identical indicator in the measurement results
readout. This makes it easy for you to verify that the readout shows results
for the correct waveform and the correct feature on that waveform. See
figure 3-38 for an example.

Tool Tips

To find out what a particular measurement tool does, move the

mouse pointer over it for a moment. A small popup will appear that
describes the measurement.

«
...
69
70
71
72
73
...
»

Содержание Infiniium



































































































































Отзывы:

Нет отзывов

Похожие инструкции для Infiniium

Бренд: Rain Bird Страницы: 2

Бренд: Panlux Страницы: 2

Бренд: Eaton Страницы: 2

Бренд: Eaton Страницы: 20

Бренд: IEMCA Страницы: 82

KID 80-IV Touch

Бренд: IEMCA Страницы: 122

Бренд: Calrec Страницы: 92

Бренд: Raymarine Страницы: 124

Бренд: Raymarine Страницы: 192

Бренд: TDR Страницы: 8

Бренд: Yamaha Страницы: 16

Бренд: Kattsafe Страницы: 19

UG 2200 Special

Бренд: Amazone Страницы: 252

Бренд: HOFFEN Страницы: 22

Бренд: KEP Страницы: 33

Biosafe 110 Port

Бренд: Sartorius Страницы: 2

Бренд: Lightolier Страницы: 2

Бренд: orfit Страницы: 3

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды