Agilent Technologies HP 83711A, Руководство пользователя

Страница: 210 / 251

Error Messages
Messages
The calibration data was not written correctly after the calibration.
Close the PG switch and do the calibration again.
787 787,"FM cal and Pincho cal not initialized;(787)"
The YIG calibration has not been done for both YIG bands or else the
pincho cal values have not been entered yet.
790 790,"Scan-mod 0.01-1 GHz gain tables bad;(790)"
Checksum was invalid for the AM gain tables . If you need to use this
frequency range and scan AM modulation, see the explanation for
error number 4000.
793 793,"Scan AM cal not valid, defaults used;(793)"
Scan AM level may be in error due to invalid calibration data. If you
need to use scan AM modulation, see the explanation for error number
4000.
794 794,"Scan-mod 1-20 GHz gain tables bad;(794)"
Checksum was invalid for the AM scan gain tables . If you need to use
this frequency range and scan AM modulation, see the explanation for
error number 4000.
795 795,"Scan-mod 1-20 GHz linear 1 tables bad;(795)"
Checksum was invalid for the AM scan linear 1 tables . If you need to
use this frequency range and scan AM modulation, see the explanation
for error number 4000.
796 796,"Scan-mod 1-20 GHz linear 2 tables bad;(796)"
Checksum was invalid for the AM scan linear 2 tables . If you need to
use this frequency range and scan AM modulation, see the explanation
for error number 4000.
800 800,"Options not saved, PG switch is not 0;(800)"
The instrument option bit-elds were not saved to EEPROM. Open up
the synthesizer , switch the PG switch to 0, and try setting the option
bit-elds again.
801 801,"Serial num not saved, PG switch is not 0;(801)"
The instrument serial number was not saved to EEPROM. Open up
the synthesizer , switch the PG switch to 0, and try setting the serial
number again.
8-22