Agilent Technologies G1926A, Установка

Страница: 4 / 8

4
7. Connect the GC/Panel cable to the port at the lower rear of the tray
assembly. See Figure 6.
Figure 6. Connect power cable
8. Install at least one injector in the front or back position and connect its
power cable to the GC.
9. Set up a test vial handling sequence on the 6890 gas chromatograph
panel display and keypad. See Figure 7. This sequence will be used to
adjust the BCR position for vial transfer, placement, and pickup.
Figure 7. Sequence screen