Installation Note E8361-90003
7
Tools and Equipment Required for the Installation
CAUTION
Use a 5/16-inch torque wrench set to 10 in-lbs on all cable connections except the
front-panel connectors to which the front-panel jumpers attach (Option 014).
Use a 5/16-inch torque wrench set to 21 in-lbs for these connections.
Test Equipment Required for Post-Upgrade Adjustments
Description
Qty
Part Number
T-10 TORX driver (set to 9 in-lbs)
1
N/A
T-20 TORX driver (set to 21 in-lbs)
1
N/A
5/16-inch torque wrench (set to 10 in-lbs)
1
N/A
5/16-inch torque wrench (set to 21 in-lbs) (Option 014 only)
1
N/A
ESD grounding wrist strap
1
9300-1367
5-ft grounding cord for wrist strap
1
9300-0980
2 x 4 ft conductive table mat and 15-ft grounding wire
1
9300-0797
ESD heel strap (for use with conductive floors)
1
9300-1308
Description
Agilent Part Number
Power meter
E4418B/E4419B
Power sensor, Type-N (100 kHz–4.2 GHz)
8482A
Power sensor, 2.4 mm (4.2 GHz–50 GHz)
8487A
Power sensor, V-Band (50 GHz–67 GHz)
a
a. This sensor and adapter must be calibrated together by the Agilent factory. The data supplied
are only valid as long as the sensor and adapter remain connected.
V8486A
Adapter, WR-15 to 1.85 mm (m)
V281B
Adapter, 1.85 mm (f) to 1.85 mm (f)
b
b. The 1.85 mm connector has the same ruggedness and is compatible with the 2.4 mm connec-
tor. 1.85 mm and 2.4 mm connectors and adapters may be used interchangeably.
85058-60114
Adapter, 2.4 mm (f) to 2.4 mm (f)
11900B
Adapter, Type-N (f) to 2.4 mm (f)
11903B
Test cable, 2.4 mm (f) to 2.4 mm (f)
Test cable, 1.85 mm (f) to 1.85 mm (f)
85133C
N4697E