Agilent Technologies E8257D Скачать руководство пользователя страница 17

Страница: 17 / 42

Chapter 2

Getting Started

Ordering Accessories

The following accessories can be ordered when a signal generator is purchased, or at any time afterward. To
order accessories, refer to

“Contacting Agilent Sales and Service Offices” on page 16

Front Handles and Rack Mount Flanges

Handles can be purchased and attached to the front of the signal generator. These handles can also be
purchased with a rack mount kit to facilitate rack installation. Hardware can be ordered as a kit to support
either preference.

Table 2-2

lists the part numbers for these kits.

E8257D/67D PSG Documentation

Table 2-3

lists the part numbers and descriptions for documentation available in hardcopy and CD-ROM

format.

Table 2-2

Front Handle and Rack Mount Flange Kits

Description

Part Number

Rack Mount Kit without Handles (Option 1CM)

5063-9215

Front Handle Kit (Option 1CN)

5063-9228

Rack Mount Kit with Handles (Option 1CP)

5063-9222

Table 2-3

Available E8257D/67D PSG Documentation

Document Type

Description

Part Number

Documentation Set
(Option ABA)

•

set includes all items listed in this table, with the exception of the
Installation Guide, the Service Guide, and the documentation
CD-ROM

E8251-90350

Documentation
CD-ROM
(Option CD1)

•

PDF files of the E8257D/67D PSG documentation set, including
the Installation Guide and the Service Guide

•

programming examples

•

error messages

E8251-90351

Installation Guide

•

installation instructions and requirements

•

operation verification procedure

•

safety and regulatory information

E8251-90352

Содержание E8257D











































Результаты поиска

Содержание E8257D

Отзывы:

Бренды по названию

Популярные бренды

Agilent Technologies E8257D, Руководство по установке

Результаты поиска

Содержание E8257D

Отзывы:

Бренды по названию

Популярные бренды