©
2000 Agilent Technologies
Automatic Barcode Reader
19
Figure 23
ALIGNBCR Usage and Output for Automatic Mode
The“-a” parameter allows for automatic alignment. Each read cycle is contin-
uously generated for all scanners used.
There is a second way to run ALIGNBCR.EXE. The user can specify an “-m”
parameter to operate the executable in manual mode. In this mode a read cycle
can only be generated by pressing the SPACE BAR. This will allow the user to
slowly control the alignment process. Once a read cycle has been generated,
the output will be displayed. Hit ESC to quit.
Figure 24
shows the usage and
output for manual alignment.
