Agilent Technologies E5023U, Руководство по модернизации

Страница: 14 / 26

14 Chapter 2
Upgrade Procedure
Step 3: Installing new Components for E5023A
Step 3: Installing new Components for E5023A
Install the Modules in the VXI mainframe.
Exchange the old modules with the new modules. The old modules are no longer
necessary.
Place the E5043A/C and E5029K on the Spinstand
The E5043A is used to upgrade the old system to the E5023A Option 415 (1.5 Gbps),
while the E5043C is used to upgrade the old system to the E5023A Option 426 (2.6 Gbps).
See the spinstand installation manual since the location of these units depend on the type of
spinstand.
NOTE When you install the E5043C Head Amplifier Control Unit (main unit) on the Agilent
spinstand cover for the E5010C, you should fix the angle (bracket) with the four M3 screws
(p/n 0515-0372) and
four washers (p/n 3050-0893) . When you install the E5043C Head
Amplifier Control Unit (main unit) on the Agilent spinstand cover for the E5013A, you
should fix the angle (bracket) with the four M4 screws (p/n 0515-0380) (the washers are
not used). The screws and washers are included in the upgrade kit.
Table 2-1Old and new modules (upgrade to E5023A Opt. 415, 1.5 Gbps)
Old Modules New Modules
E5035A E5035B
E5037A or B E5037C
E5038A E5038B
Table 2-2Old and new modules (upgrade to E5023A Opt. 426, 2.6 Gbps)
Old Modules New Modules
E5035A E5035B
E5037A, B, or C E5037D
E5038A E5038B