Agilent Technologies E3101A, Руководство по установке, Страница: 8 / 12

8 Chapter 1
17-inch Monitor Rack Mount Kit Installation Guide
Installing the Rack Mount Kit
How to Use the Belt
How to Use the Belt
To Tighten the Belt
1. Thread the edge of the adjusting side of the belt into
the opening of the reeling axis (A), and pull the
adjusting side to tighten.
2. To tighten the belt, wind it by pushing and pulling
the operating lever in the directions shown (B).
Note that the belt must be wound at least two
turns, but not so it reaches the end.
3. Push the operating lever as far as it will go in the
direction (C).
Reeling Axis
Fixing Side
Adjusting
Side
A
Operating Lever
B
C
Opening Lever