Agilent Technologies E3101A, Руководство по установке, Страница: 7 / 12

Chapter 1 7
17-inch Monitor Rack Mount Kit Installation Guide
Installing the Rack Mount Kit
How to Install Agilent E3155E/G
How to Install Agilent E3155E/G
1. Remove the cabinet front door, and install the small front door.
2. Remove the blank panels attached where the 17-inch monitor is installed. To remove the panels, use the torx
Ò
wrench.
3. Attach the support rails inside the cabinet and secure them with the screws.
4. Place the support shelf on the floor.
5. Pass the belt through the openings on the support shelf.
6. Remove the stand on which the 17-inch monitor is mounted.
7. Put the 17-inch monitor on the support shelf.
8. Secure the monitor with the belt. See “How to Use the Belt”.
9. Lift the support shelf (including the monitor), place on the support rails, and slide into the cabinet.
10. Put the front panel on the cabinet frame and secure it with the screws.
11. Connect the video cables.
12. Connect one end of the power cord to the monitor, connect the other end to one of the outlets on the power
distribution unit (PDU) in the cabinet.
13. Attach the keyboard shelf in front of the support shelf, and secure it with the screws.
14. Put the keyboard and mouse on the keyboard shelf, and connect the cables to the system controller.