Agilent Technologies 85105-60047, Установочная инструкция

Страница: 7 / 10

Installation Note 85105-90023 7
Figure 3 Installation of the new A24 (top view)
2. Plug the control cable attached to the transfer switch into J8 on the motherboard (refer to
Figure 3 ).
3. Carefully attach the new A24 to the existing semirigid coax cables. Connect the lower coax
cable first. The top cables can then be easily inserted without damage. The cable attached
to port 1 will need to be bent slightly to fit (refer to
Figure 2 on page 6 ).
Avoid unnecessary bending of the coax cables. Port 2 will be left open.
4. Two screws with lock washers are supplied with this kit. Insert the two screws (p/n
2200-0103) through the new bracket and into the existing bracket and tighten (refer to
Figure 2 ).
5. Torque the semirigid coax cable connectors to 8 in-lbs (refer to Figure 2 ).
new picture needed