Agilent Technologies 85052D, Руководство пользователя и сервисное руководство

Страница: 40 / 62

6-2 85052D
Replaceable Parts
Introduction
Introduction
Table 6-1 lists the replacement part numbers for the 85052D calibration kit. Table 6-2 lists
the replacement part numbers for items not included in the calibration kit that are either
required or recommended for successful operation of the kit.
To order a listed part, note the description, the part number, and the quantity desired.
Telephone or send your order to Agilent Technologies. See
“Contacting Agilent” on page 5-4
for contact information.
Table 6-1 Replaceable Parts for the 85052D Calibration Kit
Description Qty per
kit
Agilent Part
Number
Calibration Devices (3.5 mm)
Broadband load –m–
a 1 00902-60003
Broadband load –f–
a 1 00902-60004
Offset short –m– 1 85052-60006
Offset short –f– 1 85052-60007
Offset open –m– 1 85052-60008
Offset open –f– 1 85052-60009
Adapters (3.5 mm)
–f– to –f– 1 85052-60012
–m– to –f– 1 85052-60013
–m– to –m– 1 85052-60014
Protective End Caps for Connectors
For 3.5 mm –f– connectors As
Required
1401-0202
For 3.5 mm –m– connectors As
Required
1401-0208
Wrench
5/16 in, 90 N-cm (8 in-lb) torque wrench 1 8710-1765
7 mm open-end wrench 1 8710-1761
Calibration Kit Storage Case
Box (without foam pads) 1 5180-7900
Foam pad (for lid) 1 5181-5543
Foam pad (for lower case) 1 85052-80031