Agilent Technologies 85052D, Руководство пользователя и сервисное руководство

Страница: 10 / 62

1-4 85052D
General Information
Incoming Inspection
Incoming Inspection
Refer to Chapter 6 , “Replaceable Parts.” to verify a complete shipment. Use Table 1-1 to
record the serial numbers of all serialized devices in your kit.
Check for damage. The foam-lined storage case provides protection during shipping. If the
case or any device appears damaged, or if the shipment is incomplete, refer to
“Contacting
Agilent” on page 5-4 . Agilent will arrange for repair or replacement of incomplete or
damaged shipments without waiting for a settlement from the transportation company.
See
"Returning a Kit or Device to Agilent," on page 5-3 .
Recording the Device Serial Numbers
In addition to the kit serial number, the devices in the kit are individually serialized (serial
numbers are labeled onto the body of each device). Record these serial numbers in
Table . Recording the serial numbers will prevent confusing the devices in this kit with
similar devices from other kits.
The adapters included in the kit are for measurement convenience only and are not
serialized.
Table 1-1 Serial Number Record for the 85052D
Device Serial Number
Calibration kit
Broadband load –m–
Broadband load –f–
Open –m–
Open –f–
Short –m–
Short –f–
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________
_______________________________