Agilent Technologies 85052C Скачать руководство пользователя страница 2 | Manualshive

Страница: 2 / 62

Agilent Technologies 85052C Скачать руководство пользователя страница 2

ii

Warranty

This product is warranted against defects in material and workmanship for a period of one
year from date of shipment. During the warranty period, Agilent Technologies will, at its
option, either repair or replace products which prove to be defective.

For warranty service or repair, this product must be returned to a service facility
designated by Agilent. Buyer shall prepay shipping charges to Agilent and Agilent shall
pay shipping charges to return the product to Buyer. However, Buyer shall pay all shipping
charges, duties, and taxes for products returned to Agilent from another country.

Agilent Technologies warrants that its software and firmware designated by Agilent for
use with an instrument will execute its programming instructions when properly installed
on that instrument. Agilent Technologies does not warrant that the operation of the
instrument, or software, or firmware will be uninterrupted or error-free.

Limitation of Warranty

The foregoing warranty shall not apply to defects resulting from improper or inadequate
maintenance by Buyer, Buyer-supplied software or interfacing, unauthorized modification
or misuse, operation outside of the environmental specifications for the product, or
improper site preparation or maintenance.

NO OTHER WARRANTY IS EXPRESSED OR IMPLIED. AGILENT TECHNOLOGIES
SPECIFICALLY DISCLAIMS THE IMPLIED WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE.

Exclusive Remedies

THE REMEDIES PROVIDED HEREIN ARE BUYER’S SOLE AND EXCLUSIVE
REMEDIES. AGILENT TECHNOLOGIES SHALL NOT BE LIABLE FOR ANY DIRECT,
INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, WHETHER
BASED ON CONTRACT, TORT, OR ANY OTHER LEGAL THEORY.

Assistance

Product maintenance agreements and other customer assistance agreements are available
for Agilent products.

For any assistance, contact Agilent Technologies. Refer to

for a list of Agilent

contacts.

«
1
2
3
4
...
»

Содержание 85052C































































Отзывы:

Нет отзывов

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды