manualshive.com logo in svg

Agilent Technologies 8495D, Руководство по эксплуатации и обслуживанию

Поделиться
Скачать
Agilent Technologies 8495D Скачать руководство пользователя страница 20

12 8495D/K Attenuators Operating And Service Manual

Replaceable Parts

Replaceable Parts

Table 5

 lists the replaceable parts which are the only parts that can be

replaced without access to the interior of the instrument. If any parts not
listed below need replacement, return the instrument to Agilent
Technologies.

CAUTION

Due to special fixtures necessary for assembly, do NOT attempt to replace
any parts not listed in the table below. If the instrument is opened, the
warranty is void.

Troubleshooting

Troubleshooting consists of performing the

“Operator’s Check” on page 10

.

If the instrument does not perform within limits, return the instrument to
Agilent Technologies.

Table 5

Replaceable Parts

Description

Part Number

Knob (8495D)

0370-1091

Cable, solenoid drive, 1.5 m (5 ft) long, connector plug on one
end and other end un-terminated (8495K)

8120-2178

Screws for both bases: 4-40 x 7/8 in. Fillister head

2220-0006

Base

5041-3888

Connector plug and contacts only without cable (8495K)

*TKP12-100-P-TS-100-AU

 *Available from distributors of Viking Industries, Inc., Chatsworth CA 91311

Содержание 8495D





















Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды