Agilent Technologies 81650A Скачать руководство пользователя страница 78

Страница: 78 / 92

Cleaning Instructions

How to clean connector interfaces

Agilent 81650A/1A/2A/4A/5A/6A/7A User’s Guide, Third Edition

Preferred Procedure

Use the following procedure on most occasions.

Clean the adapter by rubbing a new, dry cotton-swab over the

surface using a small circular movement.

Blow away any remaining lint with compressed air.

Procedure for Stubborn Dirt

Use this procedure particularly when there is greasy dirt on the

adapter:

Moisten a new cotton-swab with isopropyl alcohol.

Clean the adapter by rubbing the cotton-swab over the surface using

a small circular movement.

Take a new, dry soft-tissue and remove the alcohol, dissolved

sediment and dust, by rubbing gently over the surface using a small

circular movement.

Blow away any remaining lint with compressed air.

How to clean connector
interfaces

C A U T I O N

Be careful when using pipe-cleaners, as the core and the bristles of the

pipe-cleaner are hard and can damage the interface.

Do not use pipe-cleaners on optical head adapters, as the hard core of

normal pipe cleaners can damage the bottom of an adapter.

Preferred Procedure

Use the following procedure on most occasions.

Clean the interface by pushing and pulling a new, dry pipe-cleaner

into the opening. Rotate the pipe-cleaner slowly as you do this.

Then clean the interface by rubbing a new, dry cotton-swab over the

surface using a small circular movement.

Blow away any remaining lint with compressed air.

Procedure for Stubborn Dirt

Use this procedure particularly when there is greasy dirt on the

interface:

Moisten a new pipe-cleaner with isopropyl alcohol.

Содержание 81650A





























































































Результаты поиска

Содержание 81650A

Отзывы:

Agilent Technologies 81650A, Руководство пользователя, Страница: 78 / 92

Результаты поиска

Содержание 81650A

Отзывы: