Agilent Technologies 81650A Скачать руководство пользователя страница 2

Страница: 2 / 92

Agilent 81650A/1A/2A/4A/5A/6A/7A User’s Guide, Third Edition

Notices

This document contains proprietary information that is

protected by copyright. All rights are reserved.

No part of this document may reproduced in (including

electronic storage and retrieval or translation into a

foreign language) without prior agreement and written

consent from Agilent Technologies Deutschland GmbH

as governed by United States and international

copywright laws.



Agilent Technologies Deutschland GmbH

Herrenberger Str. 130

71034 Böblingen

Germany

Subject Matter

The material in this document is subject to change

without notice.

Agilent Technologies

makes no warranty of any kind

with regard to this printed material, including, but not

limited to, the implied warranties of merchantability

and fitness for a particular purpose.

Agilent Technologies shall not be liable for errors

contained herein or for incidental or consequential

damages in connection with the furnishing,

performance, or use of this material.

Printing History

New editions are complete revisions of the guide

reflecting alterations in the functionality of the

instrument. Updates are occasionally made to the guide

between editions. The date on the title page changes

when an updated guide is published. To find out the

current revision of the guide, or to purchase an updated

guide, contact your Agilent Technologies representative.

Control Serial Number: First Edition applies directly to

all instruments.

Warranty

This Agilent Technologies instrument product is

warranted against defects in material and workmanship

for a period of one year from date of shipment. During

the warranty period, Agilent will, at its option, either

repair or replace products that prove to be defective.

For warranty service or repair, this product must be

returned to a service facility designated by Agilent.

Buyer shall prepay shipping charges to Agilent and

Agilent shall pay shipping charges to return the product

to Buyer. However, Buyer shall pay all shipping charges,

duties, and taxes for products returned to Agilent from

another country.

Agilent warrants that its software and firmware

designated by Agilent for use with an instrument will

execute its programming instructions when properly

installed on that instrument. Agilent does not warrant

that the operation of the instrument, software, or

firmware will be uninterrupted or error free.

Limitation of Warranty

The foregoing warranty shall not apply to defects

resulting from improper or inadequate maintenance by

Buyer, Buyer-supplied software or interfacing,

unauthorized modification or misuse, operation outside

of the environmental specifications for the product, or

improper site preparation or maintenance.

No other warranty is expressed or implied. Agilent

Technologies specifically disclaims the implied

warranties of Merchantability and Fitness for a

Particular Purpose.

Exclusive Remedies

The remedies provided herein are Buyer’s sole and

exclusive remedies. Agilent Technologies shall not be

liable for any direct, indirect, special, incidental, or

consequential damages whether based on contract, tort,

or any other legal theory.

Assistance

Product maintenance agreements and other customer

assistance agreements are available for Agilent

Technologies products. For any assistance contact your

nearest Agilent Technologies Sales and Service Office.

Certification

Agilent Technologies Inc. certifies that this product met

its published specifications at the time of shipment from

the factory.

Agilent Technologies further certifies that its calibration

measurements are traceable to the United States

National Institute of Standards and Technology, NIST

(formerly the United States National Bureau of

Standards, NBS) to the extent allowed by the Institutes’s

calibration facility, and to the calibration facilities of

other International Standards Organization members.

ISO 9001 Certification

Produced to ISO 9001 international quality system

standard as part of our objective of continually

increasing customer satisfaction through improved

process control.

Third Edition:

81650-90A13

February 2002

First Edition:

81650-90013: E0100

January 2000

Second Edition:

81650-90013: E0300

March 2000

Third Edition:

81650-90A13

February 2002

Содержание 81650A





























































































Результаты поиска

Содержание 81650A

Отзывы:

Agilent Technologies 81650A, Руководство пользователя, Страница: 2 / 92

Результаты поиска

Содержание 81650A

Отзывы: