Agilent Technologies 81618A Скачать руководство пользователя страница 97

Страница: 97 / 114

Cleaning Information

Preserving Connectors

Agilent 81618A/9A and Agilent 81622B/3B/4B/6B/7B/8B User’s Guide, Second Edition

Preserving Connectors

Listed below are some hints on how best to keep your connectors in

the best possible condition.

Making Connections

Before you make any connection you must ensure that all cables and

connectors are clean. If they are dirty, use the appropriate cleaning

procedure.

When inserting the ferrule of a patchcord into a connector or an

adapter, make sure that the fiber end does not touch the outside of the

mating connector or adapter. Otherwise you will rub the fiber end

against an unsuitable surface, producing scratches and dirt deposits

on the surface of your fiber.

Dust Caps and Shutter Caps

Be careful when replacing dust caps after use. Do not press the bottom

of the cap onto the fiber as any dust in the cap can scratch or dirty

your fiber surface.

When you have finished cleaning, put the dust cap back on, or close

the shutter cap if the equipment is not going to be used immediately.

Always keep the caps on the equipment when it is not in use.

All of Agilent Technologies’ lightwave instruments and accessories are

shipped with either laser shutter caps or dust caps. If you need

additional or replacement dust caps, contact your nearest Agilent

Technologies Sales/Service Office.

Immersion Oil and Other Index

Matching Compounds

Wherever possible, do not use immersion oil or other index matching

compounds with your device. They are liable to impair and dirty the

surface of the device. In addition, the characteristics of your device

can be changed and your measurement results affected.

Cleaning Instrument Housings

Use a dry and very soft cotton tissue to clean the instrument housing

and the keypad. Do not open the instruments as there is a danger of

electric shock, or electrostatic discharge. Opening the instrument can

cause damage to sensitive components, and in addition your warranty

will be voided.

Содержание 81618A



















































































































Результаты поиска

Содержание 81618A

Отзывы:

Agilent Technologies 81618A, Руководство пользователя, Страница: 97 / 114

Результаты поиска

Содержание 81618A

Отзывы: