Getting Started
3.10.1
Settings for Channel 1
Selecting a Pulse
waveform
To set the operating mode and trigger mode as required, do the following:
Before setting any values, press the
Store/Recall
key and press the
Set to Defaults
softkey.
Press the
Ch 1
key to select channel 1.
Press the normal and inverted output keys to enable both outputs of
channel 1.
The
Continuous
trigger mode is enabled by default. Therefore, we do
not change it. Now, we only need to select a
Pulse
waveform.
To select a
Pulse
waveform, simply press the
Pulse
key given on the
Front Panel.
Selecting the
Frequency and
Delay
By default, the
Frequency
is already set to 1 MHz, and the
Delay
to
0 seconds, therefore we do not change these values.
Содержание 81150A
Страница 1: ...Agilent Pulse Function Arbitrary Noise Generator 81150A and 81160A Getting Started Guide...
Страница 6: ...Introduction 4 5 Operating Environment 99 4 6 Cleaning Recommendation 100...
Страница 101: ...Installation and Maintenance 81150A and 81160A Getting Started Guide 101...
Страница 102: ...Copyright Agilent Technologies 2011 First Edition March 2011 Printed in Germany...
