permission is prohibited, except as allowed under the copyright laws.
© Agilent Technologies, Inc. 2004
All Rights Reserved. Reproduction, adaptation, or translation without
Part number G2652-90108
First Edition, May 2004
Printed in USA
Agilent Technologies, Inc.
2850 Centerville Road
Wilmington, DE 19808-1610
Safety Symbols
Warnings in the manual or on the instrument must be observed during
comply with these precautions violates safety standards of design and
liability for the customer’s failure to comply with these requirements.
In the manual
A warning calls attention to a condition or possible situation that could
A caution calls attention to a condition or possible situation that could
On the instrument
all phases of operation, service, and repair of this instrument. Failure to
the intended use of the instrument. Agilent Technologies assumes no
cause injury to the user.
damage or destroy the product or the user’s work.
G2652-90108
Acknowledgements
Torx
®
is a U.S. registered trademark of Textron, Inc.
Replaces part numbers G2652-90100 and G2652-90107
See accompanying instructions for more information.
Indicates a hot surface.
Indicates hazardous voltages.
Indicates earth (ground) terminal.
Indicates explosion hazard.
Indicates radioactivity hazard.
Indicates electrostatic discharge hazard.
Indicates a pinch hazard.
