Agilent Technologies 622Vu Advisor, Руководство пользователя

Страница: 139 / 244

Modifying a FilterSet Definition
The filterset definition window looks like this:
These values are
predefined based on
the initial add-filterset
settings.
100%
The filterset name and type were defined when you first added the definition, and
can’t be changed. Follow the directions below to specify the description, the
options you want to use, and the idle-cell definition.
FilterSet Description
Specify the description as any text you want; typically something that explains
the overall purpose of the filterset. The descriptive text is only used in this
window.
FilterSet Options
Click the Options panel to make it active. Use the two check boxes at the top
lefthand side, as appropriate, to indicate whether you want to capture cells having
a bad HEC and/or idle cells.
•
Cells having a bad HEC always go in the BadHec buffer, unless the filterset
is set up to capture everything. (For everything-type filtersets they go into
the standard CaptureAll buffer, along with all other traffic.)
•
Idle cells go into a buffer that you set up explicitly, through filter entry
definitions, to store idle cells. They’re dropped if there’s no such buffer.
8: Filtering Captures
8.3 Defining FilterSets
139