Agilent Technologies 54657A, Руководство пользователя

Страница: 42 / 89

•
V2 reads the percentage the V2 marker has moved from the established
100% position. Negative readings indicate marker has moved through the
established V1 marker position.
•
∆
V reads the percentage difference between the V1 and V2 marker
repetitive to the established positions. Negative readings indicate markers
have crossed.
Voltage Cursor Measurements in Percent
8
Press the
Active Cursor t1 t2
softkey.
9
Toggle the Readout softkey to select time markers in degrees.
If Readout Time is selected, cursor measurements are displayed in seconds
(t1, t2, and
∆
t), and Hz (1/
∆
t). Operation is identical as when the module is
not installed. Refer to the User and Service Guide for your oscillosocpe for
more information.
10
Toggle the
Active Cursor t1 t2
softkey until the desired marker(s) (t1, t2,
or both) are selected, and rotate the knob closest to the
Cursors
key to set the marker(s) to the desired position.
When both t1/t2 markers are selected, rotating the knob closest to the
Cursors
key moves both markers.
Figure 2– 10
Operating the Measurement/Storage Module
To make additional cursor measurements
2–26