Agilent Technologies 08757-60159, Установочная инструкция

Страница: 14 / 46

14 08757-90195
Step 4. Remove the CRT
NOTE
Recycle or dispose of the cathode ray tube (CRT) in accordance with
applicable environmental laws.
Refer to Figure 4-1 .
1. Remove the connector clip from connector J4 and unplug the large ribbon cable (item
①
).
2. Disconnect white power cable (item
②
) from connector J1 on the graphics board and
connector J1 on the power supply board. Discard the power cable. A new power cable with
eight conductors is provided in the upgrade kit.
3. Disconnect the rear panel ribbon cable (item
③
) from connector J2.
Figure 4-1 CRT Removal
4. Disconnect the gray CRT ribbon cable (item
④
) from connector J3 by lifting the graphics
board.
5. Remove the graphics board.
6. Slide the CRT out of the front frame.