AGILE ALLY PLUS 6287, Руководство пользователя

Страница: 53 / 186

Page 3-13 CONFIGURATION
Note: A value of 00 implies an infinite page length. In infinite page length,
the ALLY PLUS will not send a form feed to the printer unless the user or
the user’s application has embedded a form feed in the data stream. To
avoid unexpected formatting results, this option should be set to 00 (infinite
page length) if any of the following are true:
• the user or the user’s application embeds escape sequences in the
data stream
• the user or the user’s application embeds pseudo transparency
strings in the data stream
• the user embeds !ALLY! commands (configuration, translate table or
PFS commands) within print jobs.
25 — DSC line spacing
If the ALLY PLUS detects a line feed in the incoming data stream, or if it
must send out a line feed itself, it will output the number of line feeds
specified by this option. The user may enter a value between 01 and 09. To
program this option, use the appropriate sequence:
!ALLY!25=01; single spacing (default)
!ALLY!25=02; use this for double spacing
26 — DSC EM generates CR/LF even in infinite line length
Typically, an EM (end of message) character will generate a CR/LF
sequence by the ALLY PLUS, unless Option #22 has been set to 00
(infinite line length). This option is provided for users who require a CR/LF
sequence to be sent to the printer upon receipt of a DSC EM, even when the
ALLY PLUS is in infinite line length. To activate this feature, use a value
of 01. The default value is 00. Refer to Section 8 — DSC Data Streams for
more information. Program this option with these sequences:
!ALLY!26=00; EM received, NL is not sent (default)
!ALLY!26=01; EM received, NL is sent