26
198935 R17
5.3.4 Welded Hopper Make-Up Package - 18' x 35°
(P/N 234532)
Figure 7.
Welded Hopper Ladder Assembly - 18’
USE 3/8” x 1” BOLTS TO
SECURE LADDER &
CAGE HOOP TO THE
SUPPORT CHANNEL
LADDER
BOTTOM CAGE HOOP
INSTALL LADDER SUPPORT
CHANNELS (P/N 234490) SO THAT
FLANGES POINT OUTWARDS
3/
8”
x
1
¼
” B
O
LT
S
SECTION A–A
(FOR BOTH BOTTOM CAGE HOOPS)
BOTTOM CAGE
HOOPS (P/N 234162)
BOLT TO SUPPORT
CHANNELS
LADDER
LADDER SUPPORT CHANNEL
WALL SHEET
HOPPER RING
BEAM
3/8” x 1¼” BOLT
A
A
NOTE:
-
HOLES ON THE TOP OF SUPPORT CHANNELS ALIGN & BOLT WITH
MATING HOLES ON THE LADDER SEGMENT & HOPPER RING BEAM
-
NO LADDER CLIPS ARE REQUIRED AT THIS LOCATION
DETAIL 1
ANGLE BRACKET
P/N 234522
92.8”
48.0”
BOTTOM CAGE SECTION USES 48” VERTICAL SUPPORTS
DETAIL 1
HOLES IN LADDER SUPPORT CHANNELS
ALIGN WITH MATING HOLES ON THE
LADDER SEGMENTS. THIS IS THE BEST
MEANS TO ALIGN SUPPORT CHANNELS.
13.2”
HOPPER LADDER MAKE-UP PACKAGES – WIDE-CORR® GRAIN BIN
