CAMERA PARAMETERS
This camera series has its own configuration menu, and either of the two methods below is available to
access the menu based on the camera model you have.
NOTE:
The methods below are available only when the camera is used with our brand’s HD CCTV
DVR.
Method 1
On the DVR live view, click the channel which connects this camera to display in the full screen mode,
and select
.
Method 2
On the DVR live view, right click to show the DVR main menu, and select “ADVANCED CONFIG”
“DCCS”. Then, select the channel which connects this camera, and click “SETUP” to enter the menu of
camera parameters.
ADVANCED CONFIG
CAMERA
CH1 CH2 CH3 CH4
DETECTION
MENU SETUP
ALERT
NETWORK
DISPLAY
RECORD
DEVICES
DCCS
DEVICE XXXXX
NOTIFY
CONNECTION OK
EXIT
When the camera menu is entered, you’ll see the keys on the bottom right corner to
move between and change those configurations.
Move between selections or change settings.
Enter the currently-selected item.
X
Quit the camera parameters mode.
MENU
DESCRIPTION
DAY / NIGHT
MODE
EXT / COLOR / B&W / AUTO
Set the day & night mode among EXT, COLOR, B
& W, and AUTO.
D TO N
1 ~ 63
Set the sensitivity for the day & night mode from
day to night.
N TO D
1 ~ 63
Set the sensitivity for the day & night mode from
night to day.
DELAY TIME
1 ~ 60
Set the delay time after which the day and night
switch is made.
AWB
MODE
AUTO / USER / (PUSH) / 8000K
/ 6000K / 4200K / 3200K
Set the white balance mode among AUTO, USER,
(PUSH), 8000K, 6000K, 4200K, 3200K, and
HOLD.
R-G GAIN
1 ~ 255
Adjust the ratio between red and green.
B-G GAIN
1 ~ 255
Adjust the ratio between blue and green.
AE
MODE
ESC / HOLD / DC
Set the exposure mode among ESC, HOLD, and
DC.
BRIGHT
0 ~ 255
Set the level of brightness to adjust the brightness
of the image.
SHUTTER
AUTO / 1/25 / 1/30 / 1/50 / 1/60 /
1/100 / 1/ 120 / 1/250 / 1/500 /
1/1000 / 1/3000 / 1/10000
Set the shutter speed for exposure.
FLICKER
OFF / 50HZ / 60HZ
Enable this function to enhance the flicker
situation.
BLC
0 ~ 16
Set the level of Back Light Compensation to adjust
the image to compensate for an area that is
overpowered by brightness because of excessive
light.
