AGFEO AC 14 analog Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 68

background image

S - 4

Set up

If you want to connect your terminals to separate
TAE sockets, you will find the connection panel for
the plug-in terminals underneath the blue cover.

Unplug the power pack from the 230 V mains
socket before removing the cover from and
working on the connection panel. Replace the
cover before plugging the power pack back into
the mains socket.

To open the connection panel,
reach underneath the blue cover on
the connection side of the
telecommunications system and pull
the cover down sharply.

The assignment of the terminal
connections is displayed on the
connection panel.

To ensure perfect functioning of the
telecommunications system and the connected
terminals, you should connect the terminals either
to the TAE sockets or the plug-in terminals! This
means that if a terminal is connected directly via a
TAE socket, e.g. connection 1, no second device
should be connected via the terminals at the same
terminal connection, e.g. La1/Lb1.

The connections La and Lb of the plug-in terminals
are connected with connections 1 and 2 of the
separate TAE sockets.

You can use commercially available telephone lines
for the connection.
We recommend: telephone lines J-Y (St) Y
Length between telecommunications system and
sockets: max. 800 metres at 0.6 mm wire diameter.

To close the connection panel, place the cover flat
on the guides. Push the cover up sharply until it
snaps audibly into place.

Connecting terminals to separate TAE sockets ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢

Terminals 13

Terminals 14

Terminals 11

La1
Lb1

Terminals 12

La2
Lb2

La3
Lb3
La4
Lb4

Fig. 4: Open connection panel

END

Connection for external music on hold (MoH) ¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢¢

To pipe in an external music on hold, connect the
headphone output of an audio device (CD player,
cassette recorder, stereo system) with a 3.5 mm
jack plug to the jack socket (external MoH) on the
connection side of the telecommunications system.
The 3.5 mm stereo jack plugs are available from
dealers.

The volume of the external music on hold is set on

the audio device. To set or check the volume, call
an internal subscriber of the telecommunications
system externally. The external connection is held
when the internal subscriber presses the refer-back
key "R". You hear the music on hold and can
adjust the volume..

N. B.! The melodies which are played must be free
of copyrights of third parties (GEMA-free).

Fig. 3: Pulling
off the cover

«
...
8
9
10
11
12
...
»

Содержание AC 14 analog





































































Отзывы:

Нет отзывов

Похожие инструкции для AC 14 analog

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды