AGFA Drystar Kiosk 5370/100 Скачать руководство пользователя страница 4

Страница: 4 / 100

Legal Notice

Agfa (Wuxi) Imaging Co., Ltd. No.1 Workshop, 115# Plot, National Hi-

Tech Industrial Development Zone, Wuxi, Jiangsu, 214028 China
For more information on Agfa products, please visit www.agfa.com.
Agfa and the Agfa rhombus are trademarks of Agfa-Gevaert N.V., Belgium or

its affiliates. Drystar is a trademark of Agfa NV, Belgium or one of its affiliates.

All other trademarks are held by their respective owners and are used in an

editorial fashion with no intention of infringement.
Agfa NV makes no warranties or representation, expressed or implied, with

respect to the accuracy, completeness or usefulness of the information

contained in this document and specifically disclaims warranties of suitability

for any particular purpose. Products and services may not be available for

your local area. Please contact your local sales representative for availability

information. Agfa NV diligently strives to provide as accurate information as

possible, but shall not be responsible for any typographical error. Agfa NV

shall under no circumstances be liable for any damage arising from the use or

inability to use any information, apparatus, method or process disclosed in

this document. Agfa NV reserves the right to make changes to this document

without prior notice. The original version of this document is in English.

Published by Agfa NV

B-2640 Mortsel - Belgium.

No part of this document may be reproduced, copied, adapted or transmitted

in any form or by any means without the written permission of Agfa NV

| Drystar Kiosk Operator Manual | Legal Notice

0401B EN 20211008 1002

Содержание Drystar Kiosk 5370/100





































































































Результаты поиска

Содержание Drystar Kiosk 5370/100

Отзывы:

Бренды по названию

Популярные бренды

AGFA Drystar Kiosk 5370/100, Руководство оператора

Результаты поиска

Содержание Drystar Kiosk 5370/100

Отзывы:

Бренды по названию

Популярные бренды