AGFA CR 10-X, Руководство по обслуживанию

Страница: 131 / 288

DD+DIS155.11E
Repair and Service
Tools and auxiliary Means
DOCUMENT CONTROL NOTE:
The controlled version of this document is available from the Agfa HealthCare Library. Any printed copy of this document is uncontrolled.
2.4.3 Destination Settings
Purpose
The menu “Destination Settings” allows entering data to modify the destination network
settings.
Usage
(1) Select service menu:
<Destination Settings>
.
Perform the required settings. See
also NOTE below.
(2) Select
<Load Destination
Network Data from USB>
to
read out the data from an adc.cpf
file on the digitizer USB flash drive.
This CPF file:

Can be created with the CCM
tool* or

Can be exported from the NX
configuration tool.
(3) If you want to go back to the
default destination settings: Select
<Load default settings>
.
(4) Select
<Test Communication>
to check the network connection to
the NX workstation.
Figure 11
*The CCM tool (
C
onfiguration and
C
ustomization
M
anager) is by default installed on the NX workstation.
NOTE:

The configuration of the digitizer settings is described in the digitizer Service
Manual, chapter 1, Controls, Connections and Setup Procedures.

Function “Load default settings” is available as of software version ARC_1404
only.
Edition 1, Revision 1 CR 10-X / CR Reader / CR 12-X / CR Advanced ReaderChapter 3.2 / Page 15 of 31
03-2013 Type 5151 / 100 / 110 / 200 / 210
Agfa Company Confidential