AGFA 5367/500 Скачать руководство пользователя

Страница: 21 / 168

Features

Note

The printer is a DICOM-only network printer.

The printer offers the following features:

• Dry technology for printing diagnostic quality hard copies in full daylight

offers important advantages: no chemistry, no wet processing, simple

cleaning procedures, no time-consuming adjustments, no darkroom and

no chemical disposal costs. The consumables can be loaded in full

daylight.

• With its compact design, the printer needs little work space and allows

easy customer access. Maintenance and service activities are reduced to

the minimum.

• The direct thermal printing system provides grayscale images with high

quality: 508 pixels per inch resolution, each pixel with 14 bit contrast

resolution.

• Multiple film formats can be used. Any combination of two film formats

can be used “on line”. Both input trays can be adjusted for all film formats.

• The input trays are equipped with an RF-tag reader, which automatically

traces the films used in the printer and protects the printer when detecting

non-identified media.

• Number of input trays.

The printer is delivered with two input trays. The input trays can use

multiple format films.

• Number of output trays

The printer is delivered with one output tray, which is suitable for the

multiple formats without any adjustment.

• A Quality Control software module is available for the Key-operator. The

QC procedure for general radiography applications has been designed to

comply with the grayscale reproduction constancy test, according to the

international standard IEC 1223-2-4.
The QC procedure for the optional mammography application has been

designed to comply with the NEMA Standards Publication XR 23-2006.

• Integrated A#sharp technology

A#sharp is a technology that enhances image sharpness. An A#sharp label

on the lower tray shows that the imager is equipped with this technology.

Dry 2.4M | Introduction |

2652B EN 20210601 1655

Содержание 5367/500









































































































































































Результаты поиска

Содержание 5367/500

Отзывы:

Похожие инструкции для 5367/500

Бренды по названию

Популярные бренды

AGFA 5367/500, Руководство пользователя

Результаты поиска

Содержание 5367/500

Отзывы:

Похожие инструкции для 5367/500

Бренды по названию

Популярные бренды