background image

9

2231C EN 20040224

Markings and labels

Always take into account the markings and labels provided on the inside and
outside of the machine. A brief overview of these markings and labels and
their meaning is given below.

Safety warning, indicating that the ADC Compact Plus Manuals 
should be consulted before making any connections to other 
equipment. The use of accessory equipment not complying with 
the equivalent safety requirements of this Digitizer may lead to a 
reduced level of safety of the resulting system. Consideration 
relating to the choice of accessory equipment shall include:

• Use of the accessory equipment in the patient vicinity,

• Evidence that the safety certification of the accessory equipment 

has been performed in accordance with the appropriate IEC 601-
1 and IEC 601-1-1 harmonized national standard.

In addition all configurations must comply with the medical 
electrical systems standard IEC 601-1-1. The party that makes the 
connections acts as system configurator and is responsible for 
complying with the systems standard.

If required contact your local service organization.

In order to reduce the risk of electric shock, do not remove any 
covers.

Caution hot:

Keep hands clear from the erasure unit.

Type B equipment:

Indicates that the ADC Compact Plus complies with the limits for 
type B equipment. 

Содержание 5146/100



































































Отзывы: