AGCO Massey Ferguson 2604H, Руководство по обслуживанию мастерской

Страница: 8 / 41

AGCO 1- 4
MF 2600 H SERIES WORKSHOP SERVICE MANUAL
INTRODUCTION AND SAFETY
4. Locking devices where specified must be
fitted. If the efficiency of a locking device is
impaired during removal it must be renewed.
The tractor warranty may be invalidated by the fitting
of parts other than genuine parts. All replacements
have the full backing of the manufacturer’s warranty.
MF2600 T4 Series Distributors and Dealers are
obliged to supply only genuine service parts.
Repair of the Tractor
Follow these important points :
CLEAN THE TRACTOR AND DIAGNOSE THE
FAULT BEFORE DIS-ASSEMBLY
If possible, make a complete diagnosis to determine
the extent of the repair required. Take precautions,
as necessary to prevent dirt or other foreign material
entering the hydraulic, fuel or air systems.
DO NOT MIX PARTS
Make particular note of special parts which should
not be interchanged.
DURING DIS-ASSEMBLY, CLEAN PARTS
THOROUGHLY AND INSPECT THEM FOR
WEAR, DAMAGE, ETC.
LABEL PARTS.
PR OT E CT PRE CISI ON OR MAC HIN ED
SURFACES.
Find manuals at https://best-manuals.com