AGCO Glencoe SS7400 Soil Saver, Руководство по сборке

Страница: 20 / 51

INSTALLATION
IMPORTANT! Mount optional deep-till shanks only
on the rear bar of implement.
1. Refer to following pages for deep-till shank
locations (same as standard shank rear bar
locations) and mark bar accordingly.
2. Deep-till shanks fit rigid or auto-reset shank
holders. Attach shank assemblies to rear bar,
and extensions if used, with hardware shown
(Figs. 1 and 3).
3. Install shank wear strips and points (Fig. 5 or 6).
4. Tighten all hardware.
Note: Refer to last page for torque values.
IMPORTANT! Inform operator to tighten bolts after
first four hours of operation.
20
DEEP-TILL SHANKS
Fig. 4 - Rear Bar Shank Extension
1. Extension (optional)
2. U-bolts
Fig. 5 - Deep Till Shank
1. Flat Point
2. Shank Wear Strip
Fig. 6 - Deep Till Shank
1. Flow Point
2. Shank Wear Strip
1
C445-39A
C445-44A
C445-42B
2
1
2
1
2