AGCO Glencoe SS7400 Soil Saver, Руководство по сборке

Страница: 19 / 51

GENERAL
For locating the shank position on the frame, refer to
the shank location diagrams on the following pages.
Mark shank holder locations on the frame as
indicated.
If using twisted shovels, install all shanks so shovels
throw soil inward except shovels near wheels.
Position those shovels to throw out- ward. On
assembly layout, “L” and “R” indicate left and right
throwing direction.
To ensure the chisel plow pulls evenly, install correct
number of RH and LH twisted shovels.
RIGID SHANK HOLDERS
Mount the shank holders on back of the bars with
two
5
8
″ U-bolts. Tighten to 110 ft-lb
(149 N ⋅ m).
SPRING CUSHION SHANK HOLDERS
Mount shank assembly to frame with two
5
8
" bent
bolts and two
5
8
" x 3
3
4
" Grade 8 bolts, lock nuts and
plate. Tighten to 170 ft-lb (231 N ⋅ m).
AUTO-RESET SHANK HOLDERS
Mount the shanks on the frame with a flat plate
clamp, three
5
8
″ x 2 ″ Grade 8 bolts and three
5
8
″ x
6 ″ Grade 5 bolts.
Tighten Grade 5 bolts to 110 ft-lb (149 N ⋅ m).
Tighten Grade 8 bolts to 170 ft-lb (231 N ⋅ m).
19
SHANK HOLDERS
Fig. 1 ¾ Rigid Shank Holder
Fig. 2 ¾ Spring Cushion Shank Holder
Fig. 3 ¾ Auto-Reset Shank Holder