AGCO Glencoe SS7400 Soil Saver, Руководство по сборке

Страница: 13 / 51

CYLINDERS and HOSES
1. Mount 4" x 16" hydraulic cylinder with cylinder
base end to main frame and secure with cylinder
pin and hairpin clips (or cotter pins).
2. Install fittings and route hoses as shown.
3. IMPORTANT! Cycle cylinder (p. 17).
4. Secure rod end clevis to axle using cylinder pin
and hairpin clips (or cotter pins).
5. Fasten hoses to frame with plastic ties.
Refer to the Torque Values Chart (end of
instructions) for important information on the
tightening of straight-thread hydraulic fittings.
Also, do not use pipe sealant or Teflon  tape on
threads.
WARNING! OPENINGS IN THE SKIN AND MINOR
CUTS ARE SUSCEPTIBLE TO
INFECTION FROM HYDRAULIC FLUID.
IF INJURED BY ESCAPING FLUID, SEE
A DOCTOR AT ONCE. WITHOUT
IMMEDIATE MEDICAL TREATMENT,
SERIOUS INFECTION CAN OCCUR.
WARNING! NEVER USE YOUR HANDS TO
LOCATE A HYDRAULIC LEAK. USE A
PIECE OF WOOD OR CARDBOARD.
HYDRAULIC FLUID ESCAPING UNDER
PRESSURE CAN PENETRATE SKIN.
13
HYDRAULIC SYSTEM - RIGID MODELS