AGCO FENDT 938 Vario MT, Руководство оператора

Страница: 30 / 41

Do not smoke in areas used for storing flammable materials.
Do not operate machine near any flame.
Do not weld on lines or tanks that contain flammable fluids. Do not flame cut lines or tanks containing
flammable fluid. Clean any such lines or tanks fully with a nonflammable solvent before welding or flame
cutting.
Check all electrical wires daily. Repair any wires loose or frayed before operating machine. Clean and
tighten all electrical connections.
Dust generated from repairing nonmetallic hoods or nonmetallic fenders can be flammable and/or
explosive. Repair such components in a well ventilated area away from open flames or sparks.
Inspect all lines and hoses for wear or for deterioration and replace if necessary.
Route hoses correctly. Lines and hoses must have sufficient support and secure clamps. Tighten all
connections to recommended torque.
1.1.30 Fire extinguisher
An optional (1) bracket can be installed on the right
front frame rail. The bracket is holds a 4.5 kg fire
extinguisher. Make sure that all clamps, guards,
and heat shields are installed correctly. Correct
installation prevents vibration, abrasions and too
much heat during the machine operation.
Do not weld the bracket onto the cab ROPS frame
to install the fire extinguisher. Do not drill holes in
the cab ROPS frame to attach the fire extinguisher.
GUID-E30F5D1A-50FD-4D6D-9D0E-9385BE099107-high.jpg [High]
Fig. 17
Make sure that a fire extinguisher (1) is available
and know the operation. Examine and service the
fire extinguisher regularly. Obey the
recommendations on the instruction plate.
GUID-C7689359-B5FD-4447-AA0C-F06C1C065EF4-high.jpg [High]
Fig. 18
1.1.31 Public road transportation
Always walk around and visually examine the machine before moving on a public road. As a warning to
others in the area, honk the horn two times before starting engine. Do a check for damage and/or defective
components that can make a dangerous condition. Make sure all machine systems operate correctly
including (but not limited to):
• front road lamps
• tail and brake lamps
• amber hazard lights
GUID-6722D2A5-CFD1-4EC0-9681-E8C8ED018312 [V2]
GUID-83333B29-DD08-4E83-9040-BB07F2BF96DE [V4]
1. Safety
30 Rubber Track Tractor
589611D1G