• Any fluid injected into the skin must be
surgically removed within a few hours or
gangrene may result;
• Doctors unfamiliar with this type of injury must
reference a knowledgeable medical source.
Hydraulic hoses
Check hydraulic hoses regularly. Immediately replace damaged and leaking hydraulic hoses. Normally
hydraulic hoses have a long working life. The working life will be reduced by:
• Normal aging;
• Weather influences;
• Use under heavy conditions.
1.3.13 Avoid heating near pressurized fluid lines
• Never heat by welding, soldering or using a
torch near pressurized fluid lines or other
flammable materials;
• Pressurized lines can be accidentally cut when
heat goes beyond immediate flame area;
• Flammable spray can be generated by heating
near pressurized fluid lines, resulting in severe
burns to personnel and bystanders.
Fig. 42
1.3.14 Welding or heating
Welding and heating can generate potentially
hazardous, toxic and/or flammable fumes or dust.
Take following precautions before welding or
heating:
• Clean booms and spray system;
• Remove paint;
• Wear an approved respirator to sand or grind
paint, avoid breathing dust.
• Remove solvent or paint stripper with soap and
water;
• Remove solvent or paint stripper containers
and other flammable material from area;
• Dispose of paint and solvent correctly;
• Allow fumes to disperse;
• Always work outside or in a well-ventilated
area.
NOTE:
Before any modification are being done on
the machine always clean the machine from any
sprayer liquid, spilled or dropped on the machine.
To avoid potentially toxic fumes.
Fig. 43
1. General
RoGator 600C
1-19
644410-1
